Utility Settings 20Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide 251File ExplorerThe File Explorer lets you navigate the oscilloscope's internal file system and thefile systems of connected USB storage devices.From the internal file system, you can load oscilloscope setup files or mask files.From a connected USB storage device, you can load setup files, mask files, licensefiles, firmware update (*.cab) files, label files, etc. Also, you can delete files on aconnected USB storage device.The oscilloscope's internal file system, under "\Keysight Flash", consists of 10locations for oscilloscope setup files, and four locations for mask files.To use the File Explorer:1 Press [Utility] > File Explorer.2 In the File Explorer Menu, press the softkey in the first position and use theEntry knob to navigate.NOTE The USB port on the front panel, and the USB port on the rear panel labeled "HOST" are USBSeries A receptacles. These are the receptacles to which you can connect USB mass storagedevices and printers.The square receptacle on the rear panel labeled "DEVICE" is provided for controlling theoscilloscope over USB. See the Programmer's Guide for more information.
