242 Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide19 Print (Screens)4 Press the Options softkey to select the print options.See “To specify the print options" on page 244.5 Press the Palette softkey to select the print palette. See “To specify the paletteoption" on page 244.6 Press the Press to Print softkey.You can stop printing by pressing the Cancel Print softkey.You can also configure the [Quick Action] key to print the display. See “Configuringthe [Quick Action] Key" on page 262.See Also • “Adding an Annotation" on page 263To set up network printer connectionsWhen the DSOXLAN LAN/VGA module is installed, you can set up network printerconnections.A network printer is a printer attached to a computer or print server on thenetwork.1 Press the [Print] key on the front panel.NOTE The oscilloscope will print the last menu visited before you pressed the [Print] key. Therefore,if you have measurements (Amplitude, Frequency, etc.) showing on the display before youpress [Print], the measurements will be shown on the printout.To print the display showing the Print Configuration Menu at the bottom, press the [Print] keytwice; then, press the Press to Print softkey.
