Horizontal Controls 2Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide 59Found search events are marked with white triangles at the top of the graticule,and the number of events found is displayed in the menu line just above the sofkeylabels.To set up searches1 Press [Search].2 Setting up searches is similar to setting up triggers:• For setting up Serial searches, see Chapter 10, “Triggers,” starting on page125 and “Searching Lister Data" on page 110.Remember that searches use the measurement threshold settings instead oftrigger levels. Use the Thresholds softkey in the Search Menu to access theMeasurement Threshold Menu. See “Measurement Thresholds" on page 198.Navigating the Time BaseYou can use the [Navigate] key and controls to navigate through:• Captured data (see “To navigate time" on page 59).• Search events (see “To navigate search events" on page 60).• Segments, when segmented memory acquisitions are turned on (see “Tonavigate segments" on page 60).To navigate timeWhen acquisitions are stopped, you can use the navigation controls to playthrough the captured data.1 Press [Navigate].2 In the Navigate Menu, press Navigate; then, select Time.3 Press the navigation keys to play backward, stop, or play forward intime. You can press the or keys multiple times to speed up theplayback. There are three speed levels.
