CHAPTER 3 TERMINALSIssue 5UNIVERGE NEAX 2000 IPS General Description Page 12012NC DescriptionRelease2000 IPSIPS DMIPS DMRFunction960012058000 AC/DC Adapter 24V/8WINTX X X AC/DC Adapter 24V/8W for the ITR-8D-2P, ITR-16D-2P and DCR-60-1P Console (INT version)960012059000 AC/DC Adapter 24V/8WUKX X X AC/DC Adapter 24V/8W for the ITR-8D-2P, ITR-16D-2P and DCR-60-1P Console (UK market)960012060000 AC/DC Adapter 24V/15WINTX X X AC/DC Adapter 24V/15W for the SN753 DESK CON -A960012061000 UK-Plug for AC/DCAdapterX X X AC Plug for AC/DCAdapter 24V/15W (UK market)4.18.8 HeadsetGN Netcom Headset for Dterm, Dterm IP and DeskCon.12NC DescriptionRelease2000 IPSIPS DMIPS DMRFunction960012053000 Headset X X X Headset for use with Dterm, Dterm IP and SN753DeskCon4.19Installation materials, local MDF and Battery optionsInstallation methodsThe 2000 IPS can be installed in three ways:Floor standing installationWall mounting installation19-inch Rack mounting installationA Floor standing installation typically consists of 1 base unit and 1 to 4 PIMs buildtogether to one stack, therefore the maximum configuration (8 PIMs) is build of twostacks of 4 PIMs. When an external battery option is required the BATTM will beinstalled on top of the base and the first PIM on the BATTM.Each type of installation requires different installation materials (e.g. brackets andassembly materials), for floor standing, wall mounting and 19 inch rack installation thesematerials will automatically be generated by Prophix when the type of installation isselected.Main Distribution FrameThe SOPHO 2000 IPS can be wired in the following ways: Via MDF
