CHAPTER 3 TERMINALSIssue 5UNIVERGE NEAX 2000 IPS General Description Page 2247.3 System Capacity7.3.1 Release overview of System Parameters and SpecificationsWith release R8 of the 2000 IPS software a maximum of 64 FP/AP can be deployed in theRemote PIM network. The maximum number of Remote Sites is therefore 15. Themaximum number of ports in a Remote PIM network is 1020. While in R6.2 thepreliminary support for remote PIM over IP the number of ports was only 512. By having1020 ports, the 256 analog trunks and 256 IP PAD channels are not eating up the portsfrom the analogue, digital and IP station ports.The number of stations in Release 9 software has been increased to a total of 980. Thecombination of Analog, Digital and IP can be used to achieve the 980-station count. AnIP Remote PIM network would be required to reach 980 TDM stations, because a stand-alone system only supports hardware up to 512 TDM stations. In R9 each type of stationhas its own limit to the number of that type of station that can be programmed.- R9 supports up to 1020 ports per system in both standalone and remote PIMconfiguration- The maximum number of Analog and Digital stations has now been increased from512 to a total of 980 in an IP Remote PIM network. The maximum in a stand-alonesystem remains 512.- IP stations have now been increased from 448 to a total of 956 for both stand-aloneand Remote PIM network.
