CHAPTER 3 TERMINALSIssue 5UNIVERGE NEAX 2000 IPS General Description Page 212when a fault occurs in a central processor system, switch network processors. Many othermiscellaneous system messages and change of key status messages are also printed.6.5.5.4 Station Service Status Display (R12.2)By entering single command (CME4, YY=00, 01), a service engineer can see a list ofservice features/station status regarding to a specific station. This information can bedisplayed on a MATWorX or Dterm CAT.6.5.5.5 System DiagnosticsWhen a fault occurs in the system, an audible and visual indication will be given at thefollowing units:External alarm indicating unitFault messages reported at MAT WorX for remote reportingAlarm lamps in front of each package mounted in the frame6.5.6 System Programming AssistantThe System Programming Assistant (SPA) is an extension to MATWorX to improve theinstall time of a PBX with a customer.The software runs on current laptops on Windows 2000 and higher with at least 256MBof memory, and can run connected to a 2000 IPS as well as disconnected from the 200IPS. The software runs on a standalone PC without any connection to a specific server.SPA will run as an extension to MATWorX. A toolbar button will be made available inMATWorX to start SPA. It will interact with the MACH Script Editor by running scriptsand processing of the results. MATWorX will connect via the PAM (PBX AccessModule) interface to the 2000 IPS.Features:Load Configuration A service engineer can load a previously savedconfiguration. This configuration could also be importedfrom a (‘Hoorn’) script or downloaded from the 2000 IPS.Save Configuration A service engineer can save the configuration in the userinterface to a file. The file will include any changes made tothe configuration. The configuration could be imported fromthe ‘ISC’ script or uploaded to the 2000 IPS.Import (ISC) Script A service engineer can import a script that was generated bythe ISC. The 2000 IPS commands will be read from the file,interpreted and saved in a 2000 IPS configuration. The 2000IPS configuration can then be saved via the SaveConfiguration use case.Generate/Export Script A service engineer can generate scripts for exporting thechanges made to the configuration or to export the wholeconfiguration. This script is then saved in a file and can beuploaded later with the MACH Script Editor to the 2000IPS. It is also possible to upload directly to a 2000 IPS via
