CHAPTER 3 TERMINALSIssue 5UNIVERGE NEAX 2000 IPS General Description Page 96Note: the first analogue card in an IPS DM should be the 4LCAA as the IPS DM is notequipped with a ringing generator.4.8.2 Digital StationThe following cards are applied for Digital lines. To these cards the Dterm series Iterminals, the DeskConsole and the DSS Console can be connected.12NC DescriptionRelease2000 IPSIPS DMIPS DMRFunction960051150223 PN-8DLCP X X X 8 DIGITAL LINE CIRCUIT• Used for Dterm Digital, DSS Console & DESK CON(SN-753)960051103311 PN-4DLCT(from release 11)11 X - - 4-line Digital Long Line Circuit Card (-48V linepower feeding)- Used for Dterm Series i, DSS/BLF Console andDesk Console- Requires PZ-PW122 for -48V line power feeding- RoHS compliant960051150224 PN-2DLCN upto10 X - - 2-line Digital Long Line Circuit Card• Used for Dterm Digital, DSS Console & DESKCON(SN-753)• Provides Line Test function.• Equipped with –48 V DC-DC on-board power supply.4.8.3 ISDN StationThe following cards provide the interface for the ISDN Basic rate (S0) station interfaceand D-channel handler. The S0-bus interface (2ILCA) is equipped for video & datapurposes only.12NC DescriptionRelease2000 IPSIPS DMIPS DMRFunction960051150208 SPN-2ILCA X X - 2 Circuit ISDN Station Card (S/T 4 wire Interface)• ETSI ISDN –1 Basic Rate Video & Data TerminalsRequires SPN-SC03B 8ICH(AP) for every four SPN-2ILCA cards.960051151233 SPN-SC03B 8ICH(AP) X X - ISDN station -channel Handler Card:• Provides the D-Channel signaling interface andcontrols a maximum of four ILC cards (Layer 2 and3).4.8.4 Central Office TrunkThe following cards provide the analogue trunk (SS-type signaling) and tie line (E&Mtype signaling) interface. The 8COT card can also be used in combination with pagingequipment (use PN-DK00 for the relay part). In combination with the PFT card the 8COT
