CHAPTER 3 TERMINALSIssue 5UNIVERGE NEAX 2000 IPS General Description Page 222Firmware Processor (FP)Firmware Processors (FP) are required when more than two PIMs/Modular Chassis (MC)are used. The FP provides supervision and status analysis of line/trunk ports, which residein the MC or PIM. The FP provides the bus interface for I/O Bus, PCM Bus, and AlarmBus in a multiple-PIM configuration. The major specifications of the FP are shownbelow:Central Processor Unit: 16-bit (25 MHz)Memory: Program Area (384 kb), Work Area (384 kb)BS01 FunctionName Code RemarksPN-CP15 Firmware Processor Card used with theS O P HO 200 0 I PS .7.2 Power7.2.1 AC Power RequirementsDESCRIPTION SPECIFICATIONSAC Input Voltage 90 to 132Vac or 180 to 264Vac; 47 to 64HzAC Input Current 3.5A(at 100V), 2.0A(at 200V)7.2.2 AC Power Consumption / Thermal Output (MaximumAC Power Consumption (KVA) Thermal Output (BTU)DESCRIPTION 100V 200V 100V 200V1-PIM 0.35 0.40 1,195 1,3652-PIM 0.70 0.80 2,389 2,7303-PIM 1.05 1.20 3,584 4,0964-PIM 1.40 1.60 4,778 5,4615-PIM 1.75 2.00 5,973 6,8266-PIM 2.10 2.40 7,167 8,1917-PIM 2.45 2.80 8,362 9,5568-PIM 2.80 3.20 9,556 10,9227.2.3 Battery RequirementsDESCRIPTION SPECIFICATIONSMax. Battery Capacity 260AH per 4 PIM (65AH (12V) x 8)DC Input Voltage for Battery -24VBuilt-in Battery Requirements 3.4AH (12V) x 2 (approx. 30min. backup)Physical Size of Built-in Battery(one 12V battery) 133(W ) x 60(H) x 67(D) mm7.2.4 Operating EnvironmentDESCRIPTION SPECIFICATIONS
