Program 12 to 15Xen Topaz Programming Manual 103PROGRAM 15: EXTENSION BASIC SETUP15-10: I NCOMING VIRTUAL EXTENSION R ING TONE ORDER SETUPDescriptionUse Program 15-10 : Incoming Virtual Extension Ring Tone Order Setup to set the priority (1-4) for theVirtual Extension Ring Tones set in Program 15-08. When Virtual Extension calls ring an extension simulta-neously, the tone with the highest order number (e.g., 1) rings. The other keys just flash.Input DataDefaultBy default, Virtual Extension Ring tones have the following order.ConditionsNoneFeature Cross Reference♦ Multiple Directory Number / Call CoverageTelephone Programming InstructionsTo enter data for Program 15-10(Incoming Virtual Extension Ring Tone Order Setup):1. Enter the programming mode.2. Enter 15 103. Enter the number of the item you want to program.4. Select the Extension number to programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼keys.5. Enter data for the item you selected + HOLD.6. Enter data for the next item in the program.ORPress DC once to enter a new item number.ORPress DC until you’ve exited that series’ programming section.INSASB COPYExtension Number Max. 4 digitsOrder Data Description RelatedProgram1-40 : Tone Pattern 11 : Tone Pattern 22 : Tone Pattern 33 : Tone Pattern 44 : Incoming Extension ringtoneIn the case of that two or more virtual ex-tensions are set on a function key on thekeyset, and the tone pattern by which thesound of each extension differs, the prior-ity of ring sound is set up.15-08Order Ring Tone(Set in Program 15-08)1 0 (Tone Pattern 1)2 1 (Tone Pattern 2)3 2 (Tone Pattern 3)4 3 (Tone Pattern 4)15-10-01 TEL200Order1 RG Pttrn015-10-xx TELxxxxxxxxx
