Program 21 to 25Xen Topaz Programming Manual 209PROGRAM 25: DID/DISA S ETUP25-05: DID/DISA ERROR MESSAGE ASSIGNMENTDescriptionUse Program 25-05 : DID/DISA Error Message Assignment to assign the VRS message number to beused as the Automated Attendant error message. For each DID/DISA trunk that the VRS will answer, enterthe VRS message (1-48) the outside caller hears if they dial incorrectly. If you enter 0 (i.e., no error mes-sage), the call reroutes according to Program 25-03 and 25-04.For each trunk, you make a separate entry for each Night Service mode.Input DataConditionsNoneFeature Cross Reference♦ Direct Inward System Access (DISA)Telephone Programming InstructionsTo enter data for Program 25-05 (DID/DISA Error Message Assignment):1. Enter the programming mode.2. Enter 25 053. Enter the number of the item you want to program.4. Select the Trunk port number to be programmed by pressing the FLASH or the VOLUME▲ orVOLUME▼ keys.5. Enter data for the item you selected + HOLD.6. Enter data for the next item in the program.ORPress DC once to enter a new item number.ORPress DC until you’ve exited that series’ programming section.INSASBTrunk Port Number 1-51Day/NightMode VRS Message Number Default Related Program1-8 0-48 (0 : No setting) 025-05-01TrkPrt1Mode1 MSG No=025-05-xxTrkPrtxxxxxxx
