Program 16 to 20Xen Topaz Programming Manual 143PROGRAM 20: SYSTEM OPTION SETUP20-17: O PERATOR’ S EXTENSIONDescriptionUse Program 20-17 : Operator’s Extension to designate an operator. When an extension user dials “0” or“9” (defined by Program 11-01 Type 5), calls go to the operator selected in this program.If you don’t assign an extension in Program 90-11-01, system alarms appear on the extension assigned inthis option.Input DataConditionsNoneFeature Cross Reference♦ IntercomTelephone Programming InstructionsTo enter data for Program 20-17(Operator’s Extension):1. Enter the programming mode.2. Enter 20 173. Enter the number of the item you want to program.4. Select the Operator number to be programmed by pressing the FLASH or the VOLUME ▲ orVOLUME▼ keys.5. Enter data for the item you selected + HOLD.6. Enter data for the next item in the program.ORPress DC once to enter a new item number.ORPress DC until you’ve exited that series’ programming section.INSASBOperator Number 1-8Prog. No. Item Input Data Default RelatedProgram20-17-01 Operator Extension Number Max. 4 digits 200 11-0120-17-02 Operator Console 0 : Normal KTS1 : Special Operator Console 020-17-01 Operat1Oper.Ext.No.20-17-xxOperatxxxxxx
