Program 12 to 15Xen Topaz Programming Manual 81PROGRAM 14: TRUNK BASIC SETUP14-07: TRUNK ACCESS MAP SETUPDescriptionUse Program 14-07 : Trunk Access Map Setup to set up the Trunk Access Maps. This sets an extension’saccess options for trunks. For example, an extension can only place outgoing calls on trunks to which it hasoutgoing access. There are 51 Access Maps with all 51 trunk ports programmed in Map 1 with full access.An extension can use one of the maps you set up in this program. Use Program 15-06 to assign Trunk Ac-cess Maps to extensions. Each trunk can have one of eight access options for each Access Map.Input DataDefaultConditionsNoneINSASBAccess Map Number 1-51Trunk Port Number Input Data1-510 : No Access1 : Outgoing Access only2 : Incoming Access only3 : Access when trunk on Hold4 : Outgoing Access and Access when trunk on Hold5 : Incoming Access and Access when trunk on Hold6 : Incoming and Outgoing Access7 : Incoming Access, Outgoing Access and Access when trunk on HoldAccess Map Number Trunk Port Number Default11 72 7: :51 721 02 0: :51 0:1 02 0: :51 0511 02 0: :51 0
