Program 21 to 25Xen Topaz Programming Manual 197PROGRAM 24: HOLD /TRANSFER SETUP24-02: SYSTEM OPTIONS FOR TRANSFERDescriptionUse Program 24-02 : System Options for Transfer to define the system options for Transfer feature.Input DataConditionsNoneFeature Cross Reference♦ TransferINSASBProg. No. Item Input Data Default RelatedProgram24-02-01 Busy TransferUse this option to prevent or allow extensions toTransfer calls to busy extensions.0 : Disable1 : Enable024-02-02 MOH or Ringback on Transferred CallsUse this option to enable or disable MOH onTransfer. If enabled (0), a transferred callerhears MOH while their call rings the destinationextension.If disabled (1), a transferred caller hears ring-back while their call rings the destination exten-sion.0 : Hold Tone1 : Ring BackTone024-02-03 Delayed Call Forwarding TimeIf activated at an extension, Delayed Call For-warding occurs after this interval. This also setshow long a Transferred call waits at an exten-sionforwarded to Voice Mail before routing to thecalled extension’s mailbox.0-64800(Sec.)1024-02-04 Transfer Recall TimeAn unanswered transferred call recalls to theextension that initially transferred it after thisinterval.0-64800(Sec.)3024-02-05 Message Wait Ring Interval TimerFor SLTs without message waiting lamps, thistimer determines the amount of time betweenintermittentringing. If this timer is set to '0' then the systemrings once.0-64800(Sec.)3024-02-07 Forced release timer for Trunk-to-TrunkTransfer. When 14-02-12 = 1 and 14-02-13 = 1this timer is also used for Call Forward Off-Premise.0-64800(Sec.)0=Off 1800 14-02-1214-02-1324-02-08 Delayed transfer timer for all extensiongroups 0-64800(Sec.)10 11-11-2811-11-2915-07-59
