Program 40 to 92Xen Topaz Programming Manual 308PROGRAM 90: MAINTENANCE PROGRAM90-02: SETTING THE PROGRAMMING PASSWORDDescriptionUse Program 90-02 : Setting the Programming Password to set the system passwords. For passwordentry purposes, the system allows 8 users to be defined. Each user can have a:• Unique alphanumeric name (up to 10 alphanumeric characters long.• Password entry of up to 8 digits (using 0-9, # and *)• Password levelThe “IN” level password is used by the “System Installer” for system programming purposes. The “SA” or“SB” level password cannot access the “IN” level programs. The reverse type (white on black) just beneaththe Description heading is the program’s access level. You can only use the program if your access levelmeets or exceeds the level the program requires. (“SA” level password can access to “SA” or “SB” pro-grams, and “SB” level password can access to “SB” programs only.)!! Caution !!It is NOT recommended to change this data unnecessarily. If the digits are changed and then forgotten,there may be no normal way to enter the program mode again.Input DataDefaultConditionsTwo extensions can be in the programming mode.INSASBUser Number 1-8Prog. No. Item Input Data RelatedProgram90-02-01 User Name Max. 10 characters90-02-02 Password Up to 8 digits90-02-03 User Level0- Prohibited user1- MF (Manufacturer level - for NEC-i use only)2- IN (Installer level)3- SA (System administrator level 1)4- SB (System administrator level 2)User No. User Name Password Level Level Description1 NEC-I - 1 (MF) Blocked User (Manufacturerprogramming access only)2 tech 12345678 2 (IN) Installer Level - Access to all programsthis manual3 ADMIN1 0000 3 (SA) System Administrator Level 1 - Re-stricted access4 ADMIN2 9999 4 (SB) System Administrator Level 2 - Morerestricted access5 -Not Used- -Not Used- -6 -Not Used- -Not Used- -7 -Not Used- -Not Used- -8 -Not Used- -Not Used- -
