Program 26 to 35Xen Topaz Programming Manual 227PROGRAM 26: ARS SERVICE & LEAST COST ROUTING26-05: LCR CARRIER TABLEDescriptionUse Program 26-05 : LCR Carrier Table to define the LCR Access Codes and routing options.These options include Authorization codes and Cost Centre Codes.Input DataConditionsThe settings must comply with the requirements of the Indirect Carrier.The operation of the @ symbol within the Access Code depend on the type of trunk. For ISDN trunks the @symbol defines that a Connect Message is received and then DTMF digits are sent in the B-Channel.Feature Cross Reference♦ Least Cost RoutingTelephone Programming InstructionsTo enter data for Program 26-05 (LCR Carrier Table):1. Enter the programming mode.2. Enter 26 053. Enter the number of the item you want to program.4. Select the Carrier Table number to be programmed by pressing the FLASH or the VOLUME▲ orVOLUME▼ keys.5. Enter data for the item you selected + HOLD.6. Enter data for the next item in the program.ORPress DC once to enter a new item number.ORPress DC until you’ve exited that series’ programming section.INSASBCarrier Table Number 1-25Prog. No. Description Input Data Default RelatedProgram26-05-01 Delete DigitsEnter the quantity of leading dig-its that need to be deleted0-16026-05-02 Access Code (Add Digits)Enter the Access Code and Op-tion to route to the Indirect CarrierMax. 16 digits (0-9,*,#,@,Pause) No setting26-05-03 Authorization Code TableEnter the table number that con-tains the correct Authorizationcode.0-10026-05-04 Cost Centre CodeOptionally enter a cost centrecode.0 : Not used1 : Used 026-05-01CarTBL1Delete digit 026-05-xx CarTBLxxxxxxx
