Program 21 to 25Xen Topaz Programming Manual 193PROGRAM 32: ANSWER FEATURES SETUP23-03: UNIVERSAL ANSWER/AUTO ANSWERDescriptionUse Program 23-03 : Universal Answer/Auto Answer to assign trunk routes 1-25 (set in Program 14-06)to extensions for Universal Answer. If the call ringing the paging system is in an extension’s assigned route,the user can dial the Universal Answer code (843) to pick up the call.You can also use this program to let an extension user automatically answer trunk calls that ring other ex-tensions (not their own). When the user lifts the handset, they automatically answer the ringing calls basedon Trunk Group Routing programming (defined in Program 14-06). The extension user’s own ringing calls,however, always have priority over calls ringing other co-worker’s extensions. Refer to the Line Preferencefeature for more information.You make one entry for each Night Service mode.Input DataConditionsNoneFeature Cross Reference♦ Line Preference♦ Night ServiceTelephone Programming InstructionsTo enter data for Program 23-03(Universal Answer/Auto Answer):1. Enter the programming mode.2. Enter 23 033. Enter the number of the item you want to program.4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME▲ orVOLUME▼ keys.5. Enter data for the item you selected + HOLD.6. Enter data for the next item in the program.ORPress DC once to enter a new item number.ORPress DC until you’ve exited that series’ programming section.INSASBExtension Number Max. 4 digitsDay/NightMode.Route TableNumber Default Description RelatedProgram1-8 0-25 0Use this program to let an extension userautomatically answer trunk calls that ringother extensions.When the user lifts the handset, theyautomatically answer the ringing callsbased on Trunk Group Routing program-ming (defined in Program 14-06).14-0623-03-01 TEL200Mode1 Route=023-03-xx TELxxxxxxxxx
