Program 40 to 92Xen Topaz Programming Manual 322PROGRAM 90: MAINTENANCE PROGRAM90-12: SYSTEM ALARM OUTPUTDescriptionUse Program 90-12 : System Alarm Output to set the options for the alarm report. This program has 6separate menu options. Define the output port to be used as the output for system alarm report and set thesystem alarm options. The system can have up to 50 reports.Input DataConditionsNoneFeature Cross ReferenceNoneTelephone Programming InstructionsTo enter data for Program 90-12 (System Alarm Output):1. Enter the programming mode.2. Enter 90 123. Enter the number of the item you want to program.4. Enter data for the item you selected + HOLD.5. Enter data for the next item in the program.ORPress DC once to enter a new item number.ORPress DC until you’ve exited that series’ programming section.INSASBProg. No. Item Input Data Default90-12-01Output Port TypeIndicate the type of connection used for theSystem Alarms. The baud rate for the COMport should be set in Program 10-21-02.0 : No setting1 : COM Port (EXIFU) 090-12-02 -Not Used- - -90-12-03 Output All Alarm Reports Print All? (Yes : 1) -90-12-04 Printout New Alarm Reports Print New? (Yes: 1) -90-12-05 Clear All Alarm Reports All Clear? (Yes : 1) -90-12-06 Output Mode 0 : Manual1 : Auto 090-12-01Output Type 090-12-xxxxxxx
