Program 21 to 25Xen Topaz Programming Manual 172PROGRAM 22: INCOMING CALL SETUP22-02: I NCOMING C ALL TRUNK SETUPDescriptionUse Program 22-02 : Incoming Call Trunk Setup to assign the incoming trunk type for each trunk. Thereis one item for each Night Service Mode.Input DataConditionsNoneFeature Cross Reference♦ Central office Calls, AnsweringTelephone Programming InstructionsTo enter data for Program 22-02(Incoming Call Trunk Setup):1. Enter the programming mode.2. Enter 22 023. Enter the number of the item you want to program.4. Select the trunk number to be programmed by pressing the FLASH or the VOLUME ▲ or VOLUME▼keys. 5. Enter data for the item you selected + HOLD.6. Enter data for the next item in the program.ORPress DC once to enter a new item number.ORPress DC until you’ve exited that series’ programming section.INSASB COPYTrunk Port Number 1-51Day/NightMode. Incoming Type Default Description RelatedProgram1-8 0 : Normal1 : VRS (Second Dial Tone if noVRS installed)2 : DISA3 : DID (ISDN)4 : DIL5 : -Not Used-6 : Delayed VRS/DISA0 Use this option to set the fea-ture type for the trunk you areprogramming.14-0425-0125-0225-0325-0425-0625-0725-0925-1025-1125-1225-1322-02-01 Trunk1Mode1 TRK Type=022-02-xx Trunkxxxxxxx
