Chapter 8 Capturing Images with Advanced Setting Menu95Photographing andPlaying Images(1) Setting NR (noise reduction)DS-L3 can reduce image noises by averaging out multiple frames.Follow the steps below to switch the noise reduction on and off.1 Display the [CAM MENU: NR/SD/SET] screen.2 Press the [NR] button.The [NR] submenu is displayed.3 Press one of the following buttons in the submenu toswitch the noise reduction (NR) on or off.• [OFF] (default)• [ON]Selecting any of these buttons closes the submenu, and theicon of the [NR] button changes in accordance with theselection.NR (noise reduction) optionsOption DescriptionOFF Noise reduction is not used. (default)ON Noise reduction is used.Setting NR (noise reduction)Effect of noise reductionSetting the noise reduction on reduces noises in the screen showing a clear image.However, setting noise reduction on creates residual images; set it off when you photograph a moving object orneed quicker responses for focusing or other occasions.Setting for power-onThe noise reduction setting is saved at the time of power-off and recovered at the next power-on. If [CUSTOM No]has been configured in the [SETUP MENU: MAIN], the setting specified by the custom setting is used.Automatic change of setting valuesIn some cases, the on/off of noise reduction changes with the following operations:• Selection of [SCENE/CSM]:The mode changes to the one registered as the scene mode/custom setting.• Execution of [CLR SET]:Executing [CLR SET] in the [CAM MENU: NR/SD/SET] screen sets noise reduction off.132Switch on/off ofNR (noisereduction).
