Chapter 12 On-Screen Measurement146Adding Annotationsand Measuring12.1 Displaying Toolbar1 Press the [TOOL BAR] button on the task bar.The toolbar appears.If you press the [TOOL BAR] button of the task bar while thetoolbar is displayed, the location of the toolbar switchesfrom top to bottom or vice versa.2 Select how much of the toolbar is displayed using the[SHOW ALL] and [HIDE LOWER SECTION OFTOOLBAR] buttons.The toolbar has two rows of buttons. The buttons on thelower row are hidden when the toolbar is opened.Press [SHOW ALL] on the bottom right of the toolbar toshow all buttons. Pressing the [HIDE LOWER SECTION OFTOOLBAR] button hides buttons in the lower row.ToolbarImage mode when the measurement function is usedWhen the measurement function is used while the image mode is set to [ROI-L], [ROI-S], or [C.SCAN], the image modeautomatically changes to [FULL].Items on the ToolbarToolbar Items12[SHOW ALL]button2[COLOR] button[X] (Close)button[HIDE LOWERSECTION OFTOOLBAR] button[SHOW ALL]button[ANGULAR MEASUREMENT] button[CIRCULARMEASUREMENT]button[AREA MEASUREMENT] button[DISTANCE BETWEEN2 CIRCLE CENTERS] button[PITCH MEASUREMENT] button[UNDO MEASUREMENT] button[ERASE MEASUREMENT RESULT] button[UPDATE DISPLAY] button[OVERLAY ON/OFF] button[CALIBRATION] button[SAVE MEASUREMENT RESULTSAS CSV] button[ERASE ALL OVERLAY INFO] button[REDO MEASUREMENT] button[PERPENDICULARMEASUREMENT] button[2-POINT DISTANCEMEASUREMENT]button[HIDE LOWER SECTIONOF TOOLBAR] button
