Chapter 9 Playing Back and Deleting Images110Photographing andPlaying Images9.2 Playing Back an ImageThis section describes how to play back image files saved onto the recording medium connected to the DS-L3.Medium used for playbackThe DS-L3 can play back only images saved onto the recording medium (CF card or USB memory) connected tothe DS-L3 and cannot play back images on the FTP server.(1) Playing back an imageTo play the image, perform the following procedure.1 Open the VIEW menu.Information on the folder set as a destination folder of theimage is displayed in the [FOLDER] display area and the[FILE] list.Select the desired folder.2 To switch the folder of the image to be played back,press the [SOURCE] button and select the desired driveand folder.When you press the [SOURCE] button, the [PLAYBACKDRIVE/FOLDER] submenu appears.Selecting a drive (recording medium):Select a drive select button (C to F) on the upper part of thesubmenu to specify a drive. Selectable drive icons arehighlighted.• C CF card• D to F USB memorySelecting a folder:When a drive is selected, all the folders in that drive aredisplayed in the folder list. The list corresponds to the folderhierarchy. When you select a folder, the list of the subfoldersincluded in the folder is displayed.Determining selection:Press the [OK] button to determine the drive and folder. Thesubmenu closes.The selected folder path is shown in the [FOLDER] area.The list of files included in the folder is displayed in the[FILE] area.3 Select an image file from the list.The selected file is marked with a yellow frame.4 Press the [PLAY] button.The selected image appears on the monitor and “VIEW” isdisplayed on the left of the task bar, indicating that playbackis in progress.5 To change the image, repeat steps 3 and 4.To play the image saved onto another drive or folder, repeatthe procedure from step 2.6 To close the playback image and exit the playback,press the [X] button at the upper right corner of thewindow.The [FREEZE] button is selected during playback. Theplayback image can also be closed to exit the playback bypressing the [FREEZE] button to cancel the pause mode.The live image returns and the display in the task barchanges from “VIEW” to “CAM”.Playing Back an Image File1 Select a drive.Select a folder.234Select animage file.6VIEW
