Chapter 5 Working with Touch Panel35PleaseRead First(2) Switching between [CAMERA MENU], [VIEW MENU], and [TOOL MENU]Pressing the [CAM] button on the task bar provides access to [CAMERA MENU], [VIEW MENU], and [TOOL MENU].The following screens can be displayed by pressing the [CAMERA MENU] button and selecting a button on the pulldownmenu.[CAMERA MENU: CAMERA]Short screen(basic screen)The menu on this screenallows you to observe andcapture images with simpleoperations.Operation buttons on thisscreen are common anddisplayed in any [CAMERAMENU].They are also displayed in the[Camera/microscope control]menu of the [Microscopeoperation] screen.[CAMERA MENU: CAMERA]Long screen(detailed screen)This screen is displayed whenthe [▼] button of the shortscreen is pressed. The shortscreen appears again whenthe [▲] button is pressed.This menu is for settings ofimage mode, exposure mode,and photometry mode.You can place three favoritebuttons at the button of thescreen.[CAMERA MENU:IMAGE] screenThis menu is for settings of hueand contrast of images.The operation items in theupper section of the screen arethe same as the [CAMERA]screen.[CAMERA MENU:NR/SD/SET] screenThis menu is for registration ofthe noise reduction setting,shading setting, and customsetting, as well as for clearingsetting values.The operation items in theupper section of the screen arethe same as the [CAMERA]screen.[CAMERA MENU:SHOT/REC] screenThis screen is for theconfiguration of the continuousmode (consecutive capturewith interval timer) and imagerecording.The operation items in theupper section of the screen arethe same as the [CAMERA]screen.[VIEW MENU] screenMenu screen for playing backcaptured images.You can replay and deleteimages, turn the two screenmode on and off, and displaythumbnails.[TOOL MENU] screenMenu screen for simplifiedmeasure on an image oradding annotations to animage.Pressing the [TOOL SET]button changes the screen tothe [TOOL SET] menu.
