Chapter 18 Troubleshooting252OtherInformation18.5 Saved Image QualitySymptom Possible causes ActionThe image mode (control mode of theimage pickup device) is set other than[FULL].Change the image mode to settings achieving ahigh-definition image.The image source of the record mode(actually captured image) is set to [LiveImage].Set the record mode to [FULL IMAGE] on the CAM[MENU: SHOT/REC] window.Save a file based on the output image of allcomponents of the image pickup device at the time ofcapture.The image size of the record mode(actually captured image) is set to asmall value.Change the image size of the record mode to a largevalue on the CAM [MENU: SHOT/REC] window.Size of the saved image is toosmall.The file type of the image is set toJPEG BASIC.Select BMP or TIFF for [REC] setting on the CAM[MENU: SHOT/REC] window.To use the JPEG format, select JPEG NORMAL orJPEG FINE.The overlay information cannotbe read because the resolutionof an acquired image is low.The resolution of a saved image is low. Change the settings of the image mode and recordmode (image source, image size, and file type).The timing is off even if animage is temporarily stopped.The frequency of updating live imagesis slow.Select the image mode so that the frequency ofupdating images (frame rate) becomes high. Selectthe settings of the record mode achieving the desiredresolution.18.6 Image SavingSymptom Possible cause ActionThe recording medium is not insertedcorrectly.Insert the CF card to the card slot or connect the USBmemory stick to the USB port of the DS-L3 correctly.The Compact Flash (CF) card (Type I)is not used. Use the CF card (Type I).The CF card or USB memory is notformatted.Format the card by pressing the [FORMAT] button onthe [SETUP MENU: FILE] window.This system does not support therecording medium in use. Use the supported recording medium.Replace the media with media having sufficientremaining space.Delete saved images to make room.The remaining space of the recordingmedia is insufficient.Format the media by pressing the [FORMAT] buttonon the [SETUP MENU: FILE] window.An image cannot be saved ontothe recording medium.An error exists in the settings of MediaDir.Check that the desired folder is set as Media Dircorrectly.The settings of the save folder and theplayback folder are incorrect.Check that the folder is correctly set as a playbackfolder.The recorded image cannot beread. The recording medium is damaged. Replace the recording medium.
