Chapter 18 Troubleshooting255OtherInformation18.11 Warning Message ListDisplayed information Description ActionNO MEDIA Media is not connected. Recording media is not connected. Connect recordingmedia.MEDIA HAS A PROBLEM. Writing to the recording media failed.Check the setting of the destination to save images,and select recording media having sufficient space.When the recording media approaches the end of life,replace it with new recording media.OUT OF MEDIA SPACE The recording media does not havefree space needed for saving images.Replace the recording media, or delete unnecessaryfiles from the recording media and perform captureoperation again.Cannot be saved.(MEDIA LOCKED)Because the protection switch of therecording media is on (write inhibit), thefile cannot be written.Set the protection switch of the recording media to off.MEDIA ERROR Unsupported media is connected. Replace the media with another media the DS-L3supports.Cannot be deleted.(MEDIA LOCKED)Because the protection switch of therecording media is on (write inhibit), thefile or folder cannot be deleted, or themedia cannot be formatted.Set the protection switch of the recording media to off.Cannot be deleted.(MEDIA LOCKED)Because the attribute (property) of thefolder or file is “Read only”, they cannotbe deleted.Connect the recording media to the PC, and changethe file or folder to a writable state (clear the checkboxfor “Read only” of the attribute (property)).FTP HAS A PROBLEM Images cannot be recorded in the FTPserver.Check the network settings. Before recording images,perform a PING test and login test to check that youcan successfully connect to the network.The printer is not connected. Connect the printer.NO PRINTER The power of the printer is off. Turn on the printer.PRINTING FAILED. For some reason, the print processcould not be completed.Check whether or not the printer runs out of paper orink.DESTINATIN NOT SPECIFIEDThe output destination at the time ofcapture is not specified. Or, the settingof the output destination is invalid.Check the setting of the operating allocation at thetime of capture, and select the output destinationaccording to the current DS-L3 state.FILE ALREADY EXISTS.When trying to save an image, a file orfolder with the same name has beenfound on the recording media.Set the automatic creation of the name of a folder orfile, or change the destination folder to save the folderor file to save it.FILE READING ERROR For some reason, the specified filecould not be refreshed. Specify files supported by the system.FILE JPEG ERROR For some reason, the JPEG file couldnot be expanded (refreshed).The JPEG file may be corrupted.When this error occurs for another captured image,replace the recording media.WHITE BALANCE FAILED. The white balance could not beobtained correctly.Prepare a uniform subject and set the white balanceagain.SD CALCULATION FAILED. The metering of shading failed. Prepare a uniform subject and meter shading again.CAMERA MENU DISABLEDBecause startup processing is inprogress, the menu of the cameracontrol window cannot be operated.Operate the menu after the DS-L3 completely startsup.NO CAMERA The DS camera head is connectedincorrectly.Turn off the DS-L3, attach the DS camera headcorrectly, and then turn on the power again.CANNOT GET IP FROM DHCP An IP address could not be acquiredfrom a DHCP server.If a DHCP server exists on the network, check theconnection status of the network.If no DHCP server exists, set a DHCP server not tobe used in the [SETUP MENU : NETWORK] window.
