Chapter 6 Capturing Images with Simple Operations49PhotographingBasics of DS-L36.6.2 Capturing after Freezing the Live ImageYou can temporarily stop the live image to have a still image, and capture and save it as an image file.1 Check the live image.Check that the object image is displayed as desired.2 Press the [FREEZE] button of [CAM MENU].The image at the point when the button is pressed isdisplayed as a still image.While the still image is displayed, a blue frame appearsaround the [FREEZE] button. [FREEZE] is displayed on thetask bar.Pressing the [FREEZE] button again releases the freezestatus. The live image returns and the task bar displaychanges from [FREEZE] to [CAM].Note: Buttons that cannot be used when a still image isdisplayed are grayed out.3 Check the still image state.Check that the still image is displayed as desired.To obtain the still image again, press the [FREEZE] button torelease freezing and press it again while checking the liveimage.4 To save the image, press the [CAPTURE] button.A capture sound is emitted, and the still image is capturedand saved in the specified save folder.While the image is being saved, the pointer shape changeson the touch panel LCD monitor. The “Saved..1/1” messageappears on the task bar to indicate that the image has beensaved.Getting and capturing a still imageTask bar (still image)Use of the [FREEZE] button and image source settingsWith the [FULL IMAGE] is selected as the image source on the [REC MODE] menu accessed from the [CAMMANU: SHOT/REC], pressing the [FREEZE] button displays a still image in the [FULL] image mode.Press the [FREEZE] button again to switch from the still image mode and the [FULL] image mode.2 4[FREEZE]
