Chapter 5 Working with Touch Panel33PleaseRead First5.2.2 Displaying Task BarDS-L3 operation is made from menu screens.A menu screen is displayed from the task bar at the bottom of the screen.Task barInformation on task barThe following items are displayed on the task bar:• Type of image (1)- One-screen display: CAM (live image), FREEZE (still image Note 1 ), VIEW (replayed image)- Two-screen display: FREEZE&CAM (still image Note 2 and live image), VIEW&CAM (replayed image and live image),FREEZE&FREEZE (still image Note 2 and still image Note 1 ), VIEW&FREEZE (replayed image andstill image Note 1)Note 1: Image by the [FREEZE] button (press [FREEZE] for live image)Note 2: Image when window is changed to the two-screen mode (live image not available with this mode)• Electronic zoom (2)1x, 1.4x, 2x, 2.8x, 4x, 6x, 8x, 10x, 16x• Image mode (3)- One-screen display: FULL, 2x2, 4x4, FAST, ROI-L, ROI-S, C.SCAN- Two-screen display: FULL• Exposure mode (4)P: (PROG: program AE), S: (S. AE: shutter-priority), M: (MANU: manual), F: (F. AE: focus-priority)• Exposure time (5)130 μs to 600 s (DS-Fi2: 130 μs to 60 s, DS-Fi1/Vi1: 1 ms to 60 s, DS-Fi1c/Ri1/Qi1Mc: 1ms to 600 s)Operation of task bar buttonsThe task bar has the following buttons to operate:• [CAM] buttonThis button displays [CAMERA MENU] in the upper left section (or upper right section) of the screen. The position of thismenu changes between left and right every time the button is pressed.• [TOOL BAR] buttonThis button displays [TOOL BAR] in the upper right section of the screen. The position of this menu changes between upand down every time the button is pressed.• [INFO] buttonThis button displays [INFO MENU] in the lower right section of the screen. The position of this menu changes between upand down every time the button is pressed.• [SETUP] buttonThis button switches the screen to [SETUP MENU]. When [SETUP MENU] is displayed, other operation menus as well asthe task bar are closed.• [▼] buttonThis button switches between the [Camera control] screen and the [Microscope control] screen when a DS camera headand a Nikon microscope are connected. The screen does not change if only one of them is connected.[Setup] button[Informatio] button[Tool bar] button[CAM] buttonDate andtime (6)[▼] buttonType of the displayedimage (1) and itselectronic zoom (2)Image mode (3)Exposure mode(4) and exposuretime (5)
