Chapter 5 Working with Touch Panel30PleaseRead First5Working with Touch PanelThis chapter explains how to use the operation menus displayed on the DS-L3 touch panel LCD monitor.5.1 Touch Panel OperationDS-L3 has a built-in touch-panel-type LCD monitor, which displays the live image from the DS camera head, images thathave been photographed and stored, various DS-L3 settings, and operation menus for image operation settings.These operation menus can be used by touching on the screen with a stylus or by connecting a USB mouse.5.1.1 Operation Using the StylusUse the supplied Stylus for operating the screen of the touchpanel.To select buttons or menu items, gently touch the correspondingpositions on the screen using the stylus.Operation with a stylusStylus operations• Do not strike or push the touch panel screen too hard.• Use the supplied stylus to tap the touch panel LCD monitor. Never use a sharp-pointed object, such as a ballpoint pen,to touch the panel screen.• Instead of using the stylus, you can touch the panel with tip of your finger. Be careful not to let your finger nail scratchthe screen.5.1.2 Operation Using a MouseA USB mouse can be used to operate the screen instead of thestylus.A pointer is displayed on the screen when a USB mouse isconnected. Use a mouse to move a cursor and click on themonitor using the mouse button instead of touching by stylus.Drag your mouse instead of moving a stylus on the monitorsurface for operations such as specifying a value on a slider oradding an annotation with a pen. Operating with a mouseUsing the USB mouse• If you use an optical mouse, use a mouse pad designed for optical mouse. Choose a fabric-based, dark-coloredmouse pad with few patterns.• If a mouse is not detected when connected, disconnect it then connect it again.Mouse speed settingThe mouse pointer speed can be set to one of three levels. Refer to “13.5.5 Configuring Other Settings” for settingdetails.Move the pointer and clickthe mouse button.Touching on thescreen with a stylusWorking with Touch Panel5Chapter
