Chapter 5 Working with Touch Panel36PleaseRead First(3) Switching between screens of [TOOL SET MENU]Pressing the [TOOL SET] button of [TOOL MENU] changes the content of the operation menu to that of [TOOL SET MENU].The following screens can be displayed by pressing the [MENU SELECT] of [TOOL SET MENU].Note: Click the [ TOOL] button to return from [TOOL SET MENU] to [TOOL MENU].[TOOL SET: MAIN] menuThis menu is for the basic settingsof the annotation function andsettings for saving captured images.[TOOL SET: X HAIRS] menuThis menu is for settings of crosshairs and concentric circles.[TOOL SET: GRID] menuThis menu specifies the granularityof the grid.[TOOL SET: CALIB] menuThis menu is to register calibration of the unit of measurement reference.DS-L3 provides two ways of calibration: [MANUAL], in which a subject with aknown length is used as the reference, and [OPTICAL], in which themagnification of an optical device is used as the reference.(4) Switching between screens of [INFO MENU]Pressing the [INFO] button on the task bar displays [INFO MENU].The following screens can be displayed by pressing the [MENU SELECT] of [INFO MENU].[INFO: HISTOGRAM] menuThis menu displays the distribution of thebrightness of the image for each color ofRGB. Displayed on the right of the graphs arethe average values for the colors.[INFO: MIC INFO] menuDisplays the microscope information when aNikon microscope is connected.The content of the [INFO: MIC INFO] menu• The content of the [INFO: MIC INFO] menu varies depending on the connected microscope.• The [INFO: MIC INFO] menu is not displayed when a Nikon microscope is not connected to DS-L3.
