Chapter 15 Performing Direct Printing204Connecting toPC, Printer, andNetwork15.3 Changing Print SettingsPrint settings can be done in the [PRINTER] area in the [SETUP MENU: ADDITIONAL] screen. There are the followingsettings.Item Initial Setting SeeEnabling or Disabling Printing with Frame Disable 15.3.1Selecting Print Mode (Real 10 or Normal Mode) Normal mode 15.3.2Setting Compensation (Only in Real 10 Mode) - 15.3.3[SETUP MENU: ADDITIONAL] Screen15.3.1 Enabling or Disabling Printing with FrameThe [FRAME] checkbox allows you to specify whether to add a frame (or edge) when printing. Checking the box enablesprinting with a frame.Printing with a frameThe frame function may not be available depending on the printers. In this case, even though the [FRAME]checkbox is selected, printing is performed without a frame.15.3.2 Selecting Print Mode (Real 10 or Normal Mode)Select the [MAG FIX] (Real 10) checkbox to switch between the “Real 10” and “Normal” mode. The print mode is normal ifcleared, or Real 10 if selected.• Normal modeAn image is printed in a size that fits the printer paper form.• Real 10 modeAn image is printed in a size specified using the [CMP(50-150%)] (compensation) button. By compensating scaling factor(between 50% and 150%), you can precisely control the size of the object being printed.[FRAME] checkboxEnable or disable printing withframe.[MAG FIX] checkboxSwitch print mode betweenReal 10 mode and Normalmode.[CMP(50-150%)] buttonSpecify scaling ratiocompensation for Real 10 mode.[PRINT TEST] buttonPerform printing with a scale formagnification adjustment.
