Instruction ManualNivuFlow Mobile 600page 118 NFM 600 - rev. 02 / 10.07.2019charge closed. Set to negative once selecting >Adjustment< and will be includedwith calculation accordingly.47 Diagnostics Menu Inputs and Outputs47.1 Important Information on the SimulationDANGER Personal injury and damage caused by improper simulation handlingThe simulation will directly affect following plant sections. Disregarding may lead to person-al injury or damage your facility.The simulation shall be executed by trained electricians only who shall have soundknowledge on the entire control procedures of the according facility.Prepare the simulation process carefully! Switch the following systems to manual operation. Disable actuating drives and similar or limit the according functions.It is absolutely necessary to have a safety person available!DANGER Effects on plant sectionsThe simulation of NivuFlow Mobile outputs will directly affect any following plant sectionswithout any safety locking measures.Observe the hints contained within the above warning!Important NoteNIVUS herewith in advance refuse any responsibility for any possible damage to personsor objects at any extent due to the extremely high risk of danger and unforeseeable conse-quences in the event of incorrect or faulty simulation!This menu is divided in analog inputs, analog outputs, digital inputs and digital outputs.Fig. 47-1 Menu Inputs/Outputs• >Analog Inputs<Indicates the current values available at the according analog inputs.• >Analog Outputs<Indicates the available voltage values and the detected medium temperature.By checking the Simulation box it is possible to simulate a voltage (Fig. 47-1).
