Putting into OperationNFM 600 - rev. 02 / 10.07.2019 page 5731.3 MenusAll menus are described in chapter “Parameter Setting” as logical programming sequencestarting at page 62.The main menu contains eight basic menus which can be viewed and selected either bychoosing the “Menu” field (from the main screen) or “Back” (from within the submenus).The menus are:Application Guides the commissioning personnel through the entire setting ofparameters for the dimensions of measurement places, selection ofsensors, analog/digital inputs and outputs and diagnosticsData - Graphic representation of historic data on flow rate, level and (aver-age) flow velocity- Indication of 24-hour day totals as tables- Saving of data- Saving and loading of parametersSystem - Basic information (serial no., version, article no. etc.) on the trans-mitter (required by manufacturer in case of requests)- Language and date format settings under >Country Settings<- System time and time zone settings under >Time/Date<- Error messages under >Error Messages<- Service levels- Configuration of storage cycle- Parameter Reset- Feature unlock- Instrument shutdown (powerdown)- Information on batteries and the current capacityCommunication Parameters for the configuration of NivuFlow Mobile communicationinterfacesDisplay Output fields settings (text, decimal places etc...)Battery (12V) To choose the batteries/rechargeable usedQuick Start Guided, quick parameter settings for simple measurement placesAlert Activation of alarms in case of sensor errors and setting of high or lowlimit values/thresholds used to trigger alarms via e-mail using theNIVUS Web PortalTable 4 Menu overview
