Delivery, Storage and TransportNFM 600 - rev. 02 / 10.07.2019 page 2112 StorageThe permissible maximum values regarding ambient conditions such as temperature andhumidity according to chapter “17 Specifications” shall be necessarily observed.Protect the NivuFlow Mobile from corrosive or organic solvent vapours, radioactive radiationas well as strong electromagnetic radiation. To store the instrument:1. Remove the batteries.2. If the hoop guards should be mounted to attach the Connector Box remove theguards (lack of space) and attach the rubber buffers instead.Rubber buffersNecessarily attach the rubber buffers to prevent the hidden fastening plates on the reverse side of the NFM in the screwchannel from getting lost. The fastening plates are essential since they provide thethreads to fasten the hoop guards and additionally stabilise the guards on the NFM; because the buffers are designed as impact protection for NFM connections andprotect the sockets etc. from being damaged.13 TransportTake precautionary measures and use lashing straps or similar to protect the NivuFlow fromheavy shocks or vibrations.14 ReturnIn case of a required reshipment return the unit at customer cost to NIVUS GmbH in Ep-pingen using the original packaging.Insufficiently franked shipments will not be accepted! Prior to shipping (via airfreight):1. Attach PU stickers (two pieces; 31x17x3.5 mm) right and left on the enclosureframe (Fig. 14-1 no. 1). This prevents the enclosure from getting closed andeliminates vacuum formation due to extreme temperature changes.2. Place the NivuFlow Mobile safely in the original packaging for transport.Fig. 14-1 Attachment position for PU stickers
