Instruction ManualNivuFlow Mobile 600page 124 NFM 600 - rev. 02 / 10.07.201949 SimulationDANGER Effects on plant sectionsThe simulation of NivuFlow Mobile outputs will directly affect any following plant sectionswithout any safety locking measures.Observe the hints contained within the warning on page 118!Stop the simulation with “Back”.This menu allows simulation of theoretical flow. Simulation is carried out by entering assumedlevel and velocity values. These values do not really exist.Use either the >--<, >-<, >+< or >++< fields to enter smaller steps or specify absolute values(higher steps) directly in the >Velocity< field.-- = Decreases the velocity by 0.01 m/s per step- = Decreases the velocity by 0.001 m/s per step+ = Increases the velocity by 0.001 m/s per step++ = Increases the velocity by 0.01 m/s per stepBy using the simulated values (based on the channel dimension parameters set) NivuFlowMobile calculates the prevailing flow.Choosing >Flow< automatically indicates the calculated value.>DO 1< shows the currently selected function.The >Analog Output< option will output the voltage at the previously determined output.Fig. 49-1 Simulation
