A CCESS G ATEWAY98 System Administration1. From the Web Management Interface, click on Configuration, then BandwidthManagement. The Bandwidth Management screen appears:2. If required, click the check box for Bandwidth Management Enabled.3. If required, select Group Bandwidth Policies. Bandwidth Management must be enabledbefore you can enable and specify Group Bandwidth Policies.Note: The Bandwidth Management page only globally Enables and Disables BandwidthManagement and Group Bandwidth Policies. Bandwidth settings themselves are set for each WANinterface in Ethernet Ports/WAN.4. If you made any changes to the settings on this screen, you must click the check box forReboot after changes are saved? (the Access Gateway must be rebooted).5. Click on the Submit button to save your changes and reboot the system, or click on theReset button if you want to reset all the values to their previous state.Group Bandwidth Limit PolicyThe Group Bandwidth Limit Policy allows the you to assign a common bandwidth rate limitingpolicy to a group of subscriber devices. All devices within the group share the total bandwidthallocated to the policy.The Group Bandwidth Limit Policy feature defines the following vendor-specific attributes(VSAs):NomadixVSA # Name Role/Value19 GROUP_BW_POLICY_ID Defines the ID the for the group policy. Integerbetween 1 and 16777215, inclusive.
