A CCESS G ATEWAY154 System Administration12. If required, check the box for Enable RADIUS Subnet Attribute (if you want to allocate aspecific subnet to a user).13. If required, check the box for Enable Goodbye URL (if you want the system to display apost session “goodbye” page). The “goodbye” page can be defined as a RADIUS VSA orbe driven by the Access Gateway’s Internal Web Server (IWS).14. If required, check the box Enable Forget your Password to create a link that users can goto (and is added to the passthrough list) so they can run a page at their ISP to get theirpassword.15. Enable or disable the User Session Time Adjustment and credit functionality when theNSE is down.16. Enable charging for idle time to count idle time in the session time of Radius accountingpackets.17. Enable RADIUS QoS Policies to assign a QoS policy to a user in their Radius Profile.18. Click on the Submit button to save your changes, or click on the Reset button if you wantto reset all the values to their previous state.Defining the RADIUS Proxy Settings {RADIUS Proxy}A RADIUS Proxy allows the NSE to relay authentication and accounting packets between theparties performing the authentication process. Different realms can be set up to directly channelRADIUS messages to the various RADIUS servers.For additional RADIUS information, see also: “Setting up Quality of Service {QoS}” on page 148 “Defining the Realm-Based Routing Settings {Realm-Based Routing}” on page 158 “RADIUS Attributes” on page 317
