A CCESS G ATEWAY242 System Administration2. Click on the Enable IWS Goodbye Page check box to enable (or disable) the IWSGoodbye Page, as required.3. If you enabled the IWS Goodbye Page, select your preferred display options by checkingthe corresponding boxes: Display IP Address Display Authen Type Display Start Time Display Stop Time Display Byte Sent Display Byte Received Display Hypertext Link URL4. If you enabled the Hypertext Link URL feature, enter the URL for the link in the HyperText Link URL field.5. Define the following Field Label Definitions for your Goodbye Page: Session Summary IP Address Authen Type Start Time Stop Time Byte Sent Byte Received Go To6. Click on the Submit button to save your changes. Alternatively, you can click on theReset button to reset all values to their previous state, or click on the Revert button torevert all values to their default state.Defining Subscriber UI Buttons {Subscriber Buttons}This procedure allows you to define how each of the control buttons are displayed tosubscribers.If you enabled the Partner image for the Login UI, you will also see the sameimage in the IWS Post Session page.
