E Series Automated Dispensing System25www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.Teach Pendant Menu Item DescriptionsThis section provides a brief description of all the Teach Pendent menu items for quick reference as needed.Program Menu[PROGRAM MENU] 1/101 Teach/Run02 Program List03 Reset Counter04 Program Offset05 Needle Adjust06 Auto Needle AdjustMenu Item Description01 Teach/Run Used to toggle between the Teach Mode and the Run Mode.NOTE: If a program is locked, the Teach Mode is password-protected.02 Program List Used to select a program number from 1 to 99.03 Reset Counter Resets the dispense cycle count.NOTE: This function is password-protected.04 Program Offset Adjusts the XY coordinates for all dispense commands in a program whenyou enter offset values for each axis. For this function to work properly, theprogram must contain two Mark Points. Refer to “How to Set Mark Points” onpage 52 and to “How to Adjust All Points in a Program (Program Offset)” onpage 53.05 Needle Adjust Calibrates the tip height after a dispensing tip or syringe barrel change onsystems without the optional tip alignment kit. For this function to workproperly, you must set a Calibration Point. Refer to “Calibrating the Tip Height”on page 70.06 Auto Needle Adjust Calibrates the tip height after a dispensing tip or syringe barrel change onsystems with the optional tip alignment kit. For this function to work properly,you must calibrate the tip detector. Refer to “Calibrating the Tip Height” onpage 70.
