E Series Automated Dispensing System27www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.Utility Menu[UTILITY] 1/101 Program02 Memory03 Key Beep04 Online Signals05 Barcode Scanner06 System LockoutMenu Item Description01 Program Used to clear the current program or copy the current program to anotherprogram number.02 Memory CLEAR MEMORY clears all data from every program on the Teach Pendant.TOOL OFFSET changes all of a program’s XYZ values by the XYZ valuesentered as an offset.NOTE: This function is password-protected.03 Key Beep Enables or disables the key press beep.04 Online Signals Enables or disables whether the system sends status output signals fromoutputs 5–8 when the system is operating in the Run Mode. Available statusoutput signals are as follows:• Out 5: Emergency• Out 6: Running• Out 7: Standby• Out 8: Need Start SignalThe default setting is OFF (disabled).05 Barcode Scanner Enables or disables the ability to run programs using a barcode scanner (RunMode only).NOTE: The barcode scanner must be connected to the SVC USB port on thefront of the robot.06 System Lockout Locks or unlocks the current program. When a program is locked, it cannot bemodified.NOTE: This function is password-protected.Teach Pendant Menu Item Descriptions (continued)
