E Series Automated Dispensing System26www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.Menu 1[MENU 1] 1/201 Group Edit02 Ex. Step & Repeat03 Program Name04 Axis Limit05 Initialize Output06 Jog Acceleration07 Teach Move Z Clearance[MENU 1] 2/208 Utility Menu09 DiagnosticMenu Item Description01 Group Edit Used to modify a selected group of addresses in a program; availableselections are Copy, Delete, Move, Line Speed, Dispense Time, Z Value, PointOffset, Offset To, Mirror Points, and Rotate Points.02 Ex. Step & Repeat Expands all the commands contained in a Step & Repeat command (can onlybe undone using the Undo command).03 Program Name Used to modify the name of the current program.04 Axis Limit Sets the working area travel limits (X, Y, and Z axes):• E2 axis limit maximums: 200, 200, 50 mm• E3 axis limit maximums: 300, 300, 100 mm• E4 axis limit maximums: 400, 400, 100 mm• E5 axis limit maximums: 500, 500, 150 mm• E6 axis limit maximums: 620, 500, 150 mm05 Initialize Output Used to specify which outputs (1–8) switch ON at the beginning of a program.06 Jog Acceleration Sets the FAST jog speed; available selections are Low, Medium, or High.07 Teach Move Z Clearance Sets how high the tip lifts as it moves between points in the Teach Mode.Refer to “Teach Move Z Clearance (How High the Tip Lifts in the Teach Mode)”on page 34.08 Utility Menu Refer to “Utility Menu” on page 27.09 Diagnostic Refer to “Diagnostic Menu” on page 28.Teach Pendant Menu Item Descriptions (continued)
