Using the BayStack 450 10/100/1000 Series Switch3-22 302401-D Rev 00VLAN Configuration MenuThe VLAN Configuration Menu screen (Figure 3-8) allows you to select theappropriate screen to configure up to 64 port-based VLANs. When you createVLANs, you can assign various ports (and therefore the devices attached to theseports) to different broadcast domains. Creating VLANs increases networkflexibility by allowing you to reassign devices to accommodate network moves,additions, and changes, eliminating the need to change physical cabling.See “IEEE 802.1Q VLAN Workgroups” on page 1-32 for detailed informationabout configuring VLANs.Choose VLAN Configuration (or press v) from the Switch Configuration Menuscreen to open the VLAN Configuration Menu.Port Mirroring Address A Only appears when you select any of the fiveaddress-based monitoringmodes from the Port Mirroring Configuration screen. When you enter a MACaddress in this field, it is also configured into the Port Mirroring Configurationscreen. Conversely, when you enter the MAC address from the Port MirroringConfiguration screen, it also displays in this screen. See “Port MirroringConfiguration” on page 3-45 for more information.Default Value 00-00-00-00-00-00 (no MAC address assigned)Range 00-00-00-00-00-00 to FF-FF-FF-FF-FF-FFPort Mirroring Address B Only appears when you select any of the twoaddress-based monitoringmodes that use Address B from the Port Mirroring Configuration screen.When you enter a MAC address in this field, it is also configured into the PortMirroring Configuration screen. Conversely, when you enter the MACaddress from the Port Mirroring Configuration screen, it also displays in thisscreen. See “Port Mirroring Configuration” on page 3-45 for moreinformation.Default Value 00-00-00-00-00-00 (no MAC address assigned)Range 00-00-00-00-00-00 to FF-FF-FF-FF-FF-FFTable 3-6. MAC Address Table Screen Fields(continued)Field Descriptionkombk.book Page 22 Tuesday, June 29, 1999 3:25 PM