Using the BayStack 450 10/100/1000 Series Switch3-48 302401-D Rev 00Rate Limiting ConfigurationThe Rate Limiting Configuration screen allows you to limit the forwarding rate ofbroadcast and multicast packets.Figures 3-21 and 3-22 show sample rate-limiting values for the two Rate LimitingConfiguration screens.Choose Rate Limiting Configuration (or press l) from the Switch ConfigurationMenu screen to open the Rate Limiting Configuration screen.Figure 3-21. Rate Limiting Configuration Screen (1 of 2)Note: If a port is configured for rate-limiting, and it is a MultiLink trunkmember, all trunk member ports implement rate-limiting. Also, if a trunkmember is implementing rate-limiting and the port is disabled fromrate-limiting, all trunk members are disabled from rate-limiting.Rate Limiting ConfigurationUnit: [ 1 ]Port Packet Type Limit Last 5 Minutes Last Hour Last 24 Hours---- ------------- -------- -------------- --------- -------------1 [ Both ] [ None ] 56.0% 22.0% 23.0%2 [ Multicast ] [ 9% ] 30.0% 27.0% 55.0%3 [ Both ] [ None ] 25.0% 24.0% 67.0%4 [ Both ] [ 10% ] 72.0% 33.0% 55.0%5 [ Broadcast ] [ 10% ] 35.0% 54.0% 78.0%6 [ Multicast ] [ 10% ] 96.0% 45.0% 87.0%7 [ Both ] [ 10% ] 86.0% 67.0% 60.0%8 [ Both ] [ 5% ] 58.0% 44.0% 70.0%9 [ Multicast ] [ None ] 11.0% 87.0% 65.0%10 [ Both ] [ None ] 27.0% 89.0% 44.0%11 [ Both ] [ None ] 15.0% 66.0% 66.0%12 [ Both ] [ None ] 12.0% 98.0% 99.0%13 [ Both ] [ None ] 44.0% 33.0% 89.0%14 [ Both ] [ None ] 34.0% 45.0% 76.0%More...Press Ctrl-N to display choices for additional ports..Use space bar to display choices, press or to select choice.Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.kombk.book Page 48 Tuesday, June 29, 1999 3:25 PM