Using the BayStack 450 10/100/1000 Series Switch3-28 302401-D Rev 00Filter Untagged Frames Sets this port to filter (discard) all received untagged packets.Default NoRange No, YesFilter Unregistered Frames Sets this port to filter (discard) all received unregistered packets.Default NoRange No, YesPort Name The default port name (with associated stack unit number whenconfigured) assigned to this port. You can change this field to any namethat is up to 16 characters long.Default Unitx, PortxRange Any ASCII string of up to 16 printable charactersPVID Associates this port with a specific VLAN. For example, a port with aPVID of 3 assigns all untagged frames received on this port to VLAN 3.Default 1Range 1 to 4094Port Priority Prioritizes the order in which the switch forwards packets received onspecified ports (see “IEEE 802.1p Prioritizing” on page 1-53).Default 0Range 0 to 7Tagging Allows you to assign VLAN Port Membership tagging options to this port,as follows:• Untagged Access: Any VLAN that this port is a member ofwill not be802.1Q tagged.• Tagged Trunk: Any VLAN that this port is a member of will be 802.1Qtagged.The Port Membership field in the VLAN Configuration screen isdependent on the Tagging field value (see the Port Membership fielddescription in Table 3-8 on page 3-25).Default Untagged AccessRange Untagged Access, Tagged TrunkTable 3-9. VLAN Port Configuration Screen Fields(continued)Field Descriptionkombk.book Page 28 Tuesday, June 29, 1999 3:25 PM
