Using the Console Interface302401-D Rev 00 3-75TELNET ConfigurationThe TELNET Configuration screen (Figure 3-32) allows a user at a remoteconsole terminal to communicate with the BayStack 450 switch as if the consoleterminal were directly connected to it. You can have up to four active TELNETsessions at one time.Choose TELNET Configuration (or press t) from the main menu to open theTELNET Configuration screen.Figure 3-32. TELNET Configuration ScreenTable 3-27 describes the TELNET Configuration screen fields.TELNET ConfigurationTELNET Access: [ Enabled ]Login Timeout: [ 1 minute ]Login Retries: [ 3 ]Inactivity Timeout: [ 15 minutes ]Event Logging: [ All ]Allowed Source IP Address Allowed Source Mask------------------------- -------------------------[ 0.0.0.0 ] [ 0.0.0.0 ][ 255.255.255.255 ] [ 255.255.255.255 ][ 255.255.255.255 ] [ 255.255.255.255 ][ 255.255.255.255 ] [ 255.255.255.255 ][ 255.255.255.255 ] [ 255.255.255.255 ][ 255.255.255.255 ] [ 255.255.255.255 ][ 255.255.255.255 ] [ 255.255.255.255 ][ 255.255.255.255 ] [ 255.255.255.255 ][ 255.255.255.255 ] [ 255.255.255.255 ][ 255.255.255.255 ] [ 255.255.255.255 ]Use space bar to display choices, press or to select choice.Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.kombk.book Page 75 Tuesday, June 29, 1999 3:25 PM
