Using the BayStack 450 10/100/1000 Series Switch3-30 302401-D Rev 00Table 3-10 describes the VLAN Display by Port screen fields.Traffic Class ConfigurationThe Traffic Class Configuration screen (Figure 3-12) allows you to assign a Lowor High traffic classification to any of eight (0 to 7) user_priority values assignedto a received frame on specified switch ports.See “IEEE 802.1p Prioritizing” on page 1-53 for more information about thisscreen.Choose Traffic Class Configuration (or press t) from the VLAN ConfigurationMenu screen to open the Traffic Class Configuration screen.Table 3-10. VLAN Display by Port Screen FieldsField DescriptionUnit Allows you to select the unit number (when stacking is configured) to view. Toview another unit, type its unit number and press [Enter], or press thespacebar to toggle the unit numbers.Port Allows you to select the number of the port you want to view. To view anotherport, type its port number and press [Enter], or press the spacebar on yourkeyboard to toggle the port numbers.PVID Read-only field that indicates the PVID setting for the specified port.Port Name Read-only field that indicates the port name assigned to the specified port.VLANs Column header for the read-only fields listing the VLANs associated with thespecified port.VLAN Name Column header for the read-only fields listing the VLAN Names associatedwith the specified port.Note: If you change the Traffic Class Configuration for any switch in a stackconfiguration, the entire stack resets with the current configuration settings(see Table 3-1 on page 3-5 for details of the Reset option).kombk.book Page 30 Tuesday, June 29, 1999 3:25 PM
