Using the Console Interface302401-D Rev 00 3-69Spanning Tree Port ConfigurationThe Spanning Tree Port Configuration screen allows you to configure individualswitch ports or all switch ports for participation in the spanning tree.Figures 3-29 and 3-30 show sample port configurations for the two Spanning TreePort Configuration screens.Choose Spanning Tree Port Configuration (or press c) from the Spanning TreeConfiguration Menu to open the Spanning Tree Port Configuration screen.Figure 3-29. Spanning Tree Port Configuration Screen (1 of 2)Note: If spanning tree participation of any trunk member is changed (enabledor disabled), the spanning tree participation of all members of that trunk ischanged similarly.Spanning Tree Port ConfigurationUnit: [ 1 ]Port Trunk Participation Priority Path Cost State---- ----- ------------------- -------- --------- ----------1 [ Normal Learning ] 128 10 Forwarding2 [ Normal Learning ] 128 10 Forwarding3 [ Normal Learning ] 128 10 Forwarding4 [ Normal Learning ] 128 10 Forwarding5 [ Normal Learning ] 128 10 Forwarding6 1 [ Normal Learning ] 128 10 Forwarding7 1 [ Normal Learning ] 128 10 Forwarding8 [ Normal Learning ] 128 10 Forwarding9 1 [ Normal Learning ] 128 10 Forwarding10 [ Normal Learning ] 128 10 Forwarding11 [ Normal Learning ] 128 10 Forwarding12 [ Normal Learning ] 128 10 Forwarding13 3 [ Normal Learning ] 128 10 Forwarding14 3 [ Normal Learning ] 128 10 ForwardingMore...Press Ctrl-N to display choices for additional ports..Use space bar to display choices, press or to select choice.Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.kombk.book Page 69 Tuesday, June 29, 1999 3:25 PM