Technical Specifications302401-D Rev 00 A-3Interface OptionsSafety Agency CertificationElectromagnetic EmissionsElectromagnetic Immunity• 10BASE-T/100BASE-TX -- RJ-45 (8-pin modular) connectors for MDI-X interface• 100BASE-FX Fiber -- SC and MT-RJ connectors for switched 100 Mb/s(100BASE-FX) connections over 50/125 and 62.5/125 micron multimode fiber opticcable (2 km/6562 ft maximum distance)• 1000BASE-SX (Shortwave Gigabit Fiber) MDA -- SC connectors for shortwave 850nm fiber optic connections over multimode (550 m/1805 ft) fiber optic cable• 1000BASE-LX (Longwave Gigabit Fiber) MDA -- SC connectors for longwave 1300nm fiber optic connections over single-mode (3 km/9843 ft) or multimode (550 meter/1805 ft) fiber optic cable• UL Listed (UL 1950)• IEC 950/EN60950• C22.2 No. 950 (cUL)• UL-94-V1 flammability requirements for PC board• US. CFR47, Part 15, Subpart B, Class A• Canada. ICES-003, Issue 2, Class A• Australia/New Zealand. AS/NZS 3548:1995, Class A• Japan. V-3/97.04:1997, Class A• Taiwan. CNS 13438, Class A• EN55022:1995, Class A• EN61000-3-2:1995• EN61000-3-3:1994• EN50082-1:1997kombk.book Page 3 Tuesday, June 29, 1999 3:25 PM