P0911589 Issue 03 Enterprise Edge 2.0 Feature Programming Telephone GuideGeneral System featuresThe following features are available for the all the Enterprise Edge system.Pulse or tone dialingIf your external lines use pulse dialing, you can switch temporarily to tone dialing.Tone dialing allows you to communicate with devices such as answering machines,to access the features that PBX systems can provide, or to use another EnterpriseEdge system remotely.Press £ while on an active line. After you hang up, your telephone returns to pulsedialing.Disconnect supervisionWhen Disconnect Supervision is assigned to a line, the Enterprise Edge systemdetects when an external caller hangs up and releases the line for other uses. Theinstaller assigns disconnect supervision.Hunt GroupsYour Enterprise Edge system allows you to establish Hunt Groups in your system.Hunt Groups are a group of Enterprise Edge sets that accessible by a singledirectory number. The Hunt Groups feature ensures calls route to the appropriatepeople. For more information about Hunt Groups see Hunt Groups on page 81.Internal numbersEach telephone in the Enterprise Edge system has its internal number. The lengthof internal numbers in your system can be from two to seven digits. All numbers inyour system are the same length. Your installer sets the length of internal numbers(called the DN length). The default DN length is three.To find out your internal number, use the Button Inquiry feature (ƒ•‚)on an intercom button. On the M7100 telephone, Button Inquiry shows yourinternal number followed by the function assigned to your single-memory button.Line assignmentYou can assign any of the lines in your system to any of your telephones. Yourinstaller assigns lines to telephones. Settings for lines assigned are: appear only,appear and ring, or ring only.14
