114 Companion FeaturesEnterprise Edge 2.0 Feature Programming Telephone Guide P0911589 Issue 03Using Enterprise Edge featuresIt is possible to use many of the same Enterprise Edge features available to anEnterprise Edge telephone on your portable telephone. The table below lists whichfeatures are available for use on your portable telephone. For additional informationon features and the special key sequences required to use them, refer to the featurecard supplied with your portable telephone.Table 3 Features supported by Enterprise Edge portable telephonesTipIf you try to send a message from a desk telephone to a portable telephone, thedisplay of the desk telephone shows Can’t send msg.Feature DescriptionCall Forward Send calls to another telephone in your Enterprise Edge system. Thedisplay does not indicate that calls are being forwarded.Hunt Group calls override all Call Forward features. A Hunt Group DNcan be a Call Forward destination.Call Information Display the name or extension of an internal caller. If your system isequipped to receive CLASS information (Caller ID), the external callerappears on the display.Call Park On your portable, park a call.Call Park Retrieval On your portable, retrieve a parked call.Cancel Call Forward Cancel the Call Forward feature, where calls are automatically sent toanother telephone in your Enterprise Edge system.Conference See yourPortable Telephone Feature Card.Directed Call Pickup Answer any telephone that is ringing in your Enterprise Edge system.Group Pickup Answer a call ringing on another set in the same pickup group.Host system signaling Link and pause are available. See “Using System features” on page 89for more information.Line Pool On your portable, use line pools the same way a desk telephone does.Mute Prevent the person you are on the portable telephone with fromhearing you. Also, you can mute a portable’s ringing for an incomingcall.Page On your portable, page an individual telephone, several telephones,external speakers, or the entire system.A Hunt Group DN cannot be in a page zone.Pause Program in an external autodial sequence to insert a 1.5 second delay.Prime line On your portable, may be either an Intercom Line, an Assigned Line ora Line Pool.Privacy In programming, change the privacy setting for an external lineassigned to the portable. This does not give the ability to change theprivacy setting on a call by call basis.Release See yourPortable Telephone Feature Card.Speed Dial System speed dial codes only. No personal speed dial codes. Theportable has a directory that you can use to store up to 50 entries fortelephone numbers.
