48 Transferring callsEnterprise Edge 2.0 Feature Programming Telephone Guide P0911589 Issue 03Parking a callƒ‡›You can interrupt a call to retrieve it from any telephone in your system.1. Press ƒ‡›.2. Press PAGE to announce the retrieval code displayed by your telephone.Retrieving a parked call1. Select an internal line. (On the M7100 telephone, pick up the receiver.)2. Dial the Call Park retrieval code.Using Call ParkWhen you park a call, the system assigns one of 25 codes for the retrieval of the call.These codes include the Call Park prefix, which can be any digit from 1 to 9, and atwo-digit call number between 01 and 25. For example, if the Call Park prefix is 1,the first parked call is assigned Call Park retrieval code 101.The Enterprise Edge system assigns Call Park codes in sequence, from the lowestto the highest, until all the codes are used. A round-robin method means the use ofdifferent of codes ensures a call reaches the right person, especially when more thanone incoming call is parked.The highest call number (the Call Park prefix followed by 25) is used only byanalog telephones or devices connected to the system using an Enterprise EdgeATA2 or an Enterprise Edge ASM. Analog telephones or devices cannot use theother Call Park codes.Your installer programs both the Call Park prefix and the delay before parked callsreturn to the originating telephone. External calls parked for longer than theprogrammed delay return to your telephone.A call you camped has come back to you, but the callerhung up before you can re-connect.The telephone to which you have camped a call is out ofservice or is used for programming. The call has come backto you. Press CALLBACK or the line button to re-connect tothe call. On the M7100 telephone, just pick up the receiver.The line that the camped call is on is in use or that line doesnot appear at your telephone. Release the line or releasean internal line.For other displays, see Common feature displays on page 121.Line061 hung upNot in serviceCALLBACKRelease a call
