64 Communicating in the officeEnterprise Edge 2.0 Feature Programming Telephone Guide P0911589 Issue 03Removing items from your message list using an analog telephoneconnected to an ASMTo remove both internal and external messages on an analog telephone connectedto an ASM press ˚£flfi to invoke the Cancel Message Waiting feature.On analog telephones connected to an ASM, the Cancel Message Waiting featurecancels the oldest message received. The system no longer provides either aStuttered Dial Tone or a Message Waiting Lamp if there are no messages waiting.Viewing messages you have sentƒ⁄On a telephone with a two-line display, you can view the messages you have sent.1. Press ƒ⁄.2. Press SHOW to display your first sent message.3. Press NEXT to move through your sent messages.DisplaysYou have entered an invalid number when trying to cancel amessage.You have cleared an external message from your message waitinglist. The message exists in your message center until you erase itthere.You are trying to call from your message waiting list. The line thatyou are trying to use is in use by the identified Enterprise Edge user.You are viewing your message list. The display shows the numberand name of the line used for your message.You have tried to send a message to an invalid internal number or toa telephone that is out of service.SHOW appears when you have remaining messages. Press SHOW toreview messages you have sent. Press ADD to send a new message.Enter the internal number of the telephone to which you want to senda message.You have one or more messages and one or more new Call Logs.Press ƒ°‚fl to change the first line of the display tothe current time and date.You have no line button free with which to reply to a message.Cancel deniedCleared>LINENAMNEXTIn use: 221L061:LINENAMVMsgNEXT CALL CLEARMessage deniedMessage listSHOW ADD EXITMessage to:Messages & CallsMSG CALLSNo button free
